How much does dedicated circuit install cost in New Brunswick?

A dedicated circuit installation in New Brunswick typically runs $200–$600 installed, depending on the circuit's amperage, the distance from your panel, and how accessible the run is. Here's how that breaks down across the range:

• Low end ($200–$300): Short run to a nearby panel, straightforward access, standard 15A or 20A circuit — think a dishwasher or microwave in a newer home
• Mid-range ($300–$450): Moderate run, some fishing through walls, 20A–30A circuit for a dryer, EV charger rough-in, or workshop equipment
• High end ($450–$600+): Long runs, finished walls requiring drywall repair, 40A–60A circuits for electric ranges, hot tubs, or EV Level 2 chargers — or homes with older panels that need work before the circuit can be added

If your panel is already at capacity and needs a subpanel or upgrade, that's a separate cost — typically $1,500–$3,500 depending on the scope.

The permit side matters here. In New Brunswick, all electrical work must be done by a licensed electrical contractor — homeowners cannot legally do their own wiring unless they hold a valid NB electrician's licence issued by Technical Inspection Services (TIS). Your electrician is required to pull a wiring permit through NB Power (1-800-615-0522) for any installation exceeding 10 outlets or 5 kW of load, and TIS conducts the final inspection. This isn't optional — working without a permit results in a special inspection fee on top of the regular permit cost, and unpermitted work can create serious problems with your home insurance.

A few things that commonly affect pricing in NB homes specifically: Older homes in Fredericton's north side, Saint John's South End, or uptown Moncton are frequently balloon-framed Victorians or Edwardians — fishing wire through those walls takes significantly more time than a newer build in Dieppe or Quispamsis. Post-war bungalows common in Oromocto and suburban Moncton sometimes have undersized 100A panels that are already maxed out, making a panel upgrade necessary before adding circuits. Always mention your home's age when getting quotes.

The permit and inspection fees are usually modest — your licensed electrician handles the NB Power wiring permit as part of the job. Ask them to confirm the permit is pulled before they start work.

Your best next step is to get two or three quotes from licensed electrical contractors. Be specific about what you're powering (appliance type, amperage requirements), where it's located relative to your panel, and whether your home has a finished or unfinished basement — that detail alone can shift the price considerably. You can find licensed electricians serving your area through the New Brunswick Construction Network directory.