Email
Contact Us
Troubleshooting & Problems | 0 views |

Salt air is pitting the hardware on my Saint John home, what helps?

Question

Salt air is pitting the hardware on my Saint John home, what helps?

Answer from Construction Brain

Coastal corrosion is a real challenge in Saint John, and the right material choices make a dramatic difference in how long your hardware lasts.

Saint John sits right on the Bay of Fundy, and between the salt air, fog, and those famous harbour winds, standard hardware can start showing pitting and rust within a season or two. The good news is there are proven solutions used by coastal builders throughout the region.

Start with material upgrades. Marine-grade 316 stainless steel is the gold standard for coastal hardware — hinges, door handles, gate latches, deck fasteners, and exterior fixtures. It contains molybdenum, which gives it significantly better chloride resistance than the more common 304 stainless. Hot-dipped galvanized hardware is a solid budget-friendly alternative, though it will eventually corrode faster than 316 SS in a heavy salt environment. Avoid zinc-plated or chrome-plated hardware entirely — the coating is too thin and fails quickly near the water.

For deck screws and structural fasteners, look specifically for ACQ-rated stainless or hot-dipped galvanized — this is especially important if you have pressure-treated lumber, since ACQ-treated wood accelerates corrosion in standard fasteners. Many Saint John contractors have learned this the hard way after seeing decks with corroded fasteners within five years.

Maintenance matters as much as materials. Even 316 stainless benefits from a rinse with fresh water a few times a year to remove salt deposits — a simple garden hose works fine. A light coat of a marine-grade corrosion inhibitor (like Boeshield T-9 or similar) on hinges and exposed metal extends life considerably. Wax-based products work well on door hardware and fixtures.

For painted or powder-coated hardware, inspect the coating annually. Any chip or scratch becomes an entry point for salt moisture, and once it gets under the coating, the corrosion spreads fast. Touch up chips immediately with a compatible paint or clear coat.

Window and door hardware deserves special attention — these get the most daily contact and are often overlooked. If you're replacing exterior doors or windows, ask suppliers specifically for hardware rated for marine or coastal environments. Some manufacturers offer coastal-grade packages with upgraded seals and hardware as a bundle.

If you're doing a larger renovation — replacing siding, roofing, or exterior trim — this is the right time to audit all your fasteners and hardware at once. A contractor familiar with Saint John's coastal conditions will know to spec the right materials from the start. Browse licensed contractors in our New Brunswick Construction Network directory to find professionals experienced with Bay of Fundy coastal builds.

Replacement hardware runs $15–$80+ per piece for quality 316 stainless fixtures, but it's far cheaper than replacing corroded hardware every two or three years.

New Brunswick Construction Network

Construction Brain — Built by a licensed contractor with 20+ years in the field. Powered by AI with strict guidelines and real building knowledge.

Ready to Start Your Project?

Get a free, no-obligation estimate for your New Brunswick renovation. Our team at NBCN is ready to help bring your vision to life.

Contact Us