What is the average cost of fence chain link install in New Brunswick in 2026?

Chain link fence installation in New Brunswick typically runs $25–$55 per linear foot installed, all-in, for residential projects in 2026. That range covers materials and labour for a standard 4-foot residential fence — the most common height for backyard and property-line applications across the province.

Here's how the pricing breaks down across the spectrum:

• Budget end ($25–$32/ft): Basic galvanized chain link, 4-foot height, straightforward flat terrain, minimal gates. Common in rural areas where labour costs are lower.
• Mid-range ($33–$45/ft): Standard residential install, 4–6 foot height, one or two gates, minor grading required. Typical for Moncton, Fredericton, and Saint John suburban lots.
• Higher end ($46–$55+/ft): Vinyl-coated chain link (black or green), 6-foot privacy or security height, difficult terrain, multiple gates, or coastal areas where galvanized hardware upgrades are recommended.

A few factors that move the needle significantly in New Brunswick. Coastal properties near Saint John, Shediac, or the Northumberland Strait benefit from vinyl-coated chain link and stainless or hot-dipped galvanized hardware — salt air accelerates corrosion on standard galvanized fencing, and that upgrade adds roughly $5–$10/ft. Rocky terrain (common in parts of Fredericton's north side and throughout Kings County) can require post-hole drilling rather than augering, which adds time and cost. Clay soils in the Saint John River valley can also complicate post setting.

NB's frost line is 4+ feet deep — this is non-negotiable for fence posts. Properly installed chain link posts need to be set below frost depth in concrete, or you'll be dealing with heaving and leaning posts every spring. This is one of the biggest reasons DIY chain link fences fail in this province — undersized or shallow post installation. A 200-foot fence job requires 20–25 posts set at proper depth, which is a significant amount of concrete and labour.

On the permit side, most municipalities don't require a permit for standard residential fencing under 1.8m (6 feet), but you should always check your local bylaw first. Moncton, Fredericton, and Saint John all have fence setback requirements — typically 0.6m from the property line — and corner lot visibility triangles that restrict fence placement near intersections. If you're in a rural unincorporated area, check with your Regional Service Commission.

For a typical New Brunswick suburban lot — say 150–200 linear feet of fencing — you're looking at a total project cost of roughly $4,500–$9,000 depending on height, terrain, and gate count. Gates themselves run $300–$800 each installed, depending on width and hardware.

This is a project where getting two or three quotes is worthwhile. Browse licensed fencing contractors in the New Brunswick Construction Network directory to find local pros in your area who can give you an accurate on-site estimate.